What are Headlights?

Headlights, or headlamps, are your car's primary source of forward-facing light. Earlier vehicle models and classic cars initially used tungsten-based headlights. Still, most modern-day headlights are powered either by halogen bulbs, LED bulbs, or metal-halide-based bulbs often referred to as high-intensity discharge headlights.

Here we will tell you the nine best car headlight replacement steps. Let's find out.

1. Resist the Urge to Procrastinate

Subpar headlights are extremely dangerous at night or in bad weather. Many accidents occur every year due to defective light bulbs. Once your bulbs start to fade, replace them as soon as possible. Putting off work can be a fatal mistake—and a costly one to boot. However, driving without headlights is sometimes a crime. So you try and buy new bulbs immediately. That way, you stay safe, and your bank account stays safe.

Note: The above applies only to vehicles with halogen light bulbs. Some cars use HID or LED bulbs, which produce white or blue lights. These are made to last for a long time. It often takes more than 20 years. If you are experiencing a problem with your LED or HID Headlights price, visit your local mechanic to find a better solution.

2. Visit the Nearest Auto Parts Store

At most of these stores, you'll find a bulb directory. This book will give you plenty of information on which bulbs are compatible with which vehicles. Find a bulb that fits your vehicle by using the store's offerings according to your make and model. It is a good idea to carry your owner's manual with you as it will give you the best information on the type of bulbs you should purchase. We won't talk about changing both bulbs at the same time, even if only one of them is working. Headlights dim over time, and you'll want your vehicle's intensity to be the same.

3. Figure Out How to Put the Bulb Connector in Place

When you're replacing a car's headlight, behind the headlight, you'll see a three-wire plug. Hayes calls it the "bulb connector," and automakers have three main ways to maintain it. Your mission is to find out what setup is under your hood. Many vehicles use what is known as a "plastic catch" mechanism, which involves a small metal or plastic tab that sits on the bulb's connector or plug, where it meets the wiring harness. Then, there's the "metal clip" setup, a spring-loaded, paperclip-like device stabilizing the bulb holder. With this, the bulb holder sits behind a round, plastic, or rubber cap that looks and works.

4. Pop the Hood

Before installing a new bulb, you need to consider your vehicle's headlight apparatus. First, ensure the car is off, open the hood, and look behind each headlight. If you need help finding it, consult the diagrams in your owner's manual.

5. If Your Headlight has a Plastic Catch, Press the Lever

If you are working with a plastic catch mechanism. So it's often easier to remove the bulbs from where you first planted them. Gently twist until the bulb loosens. Next, push down on the lever with your thumb and slowly pull the plug straight out, then remove the bulb wire.

If Your Headlight has a Metal Clip On It, Lift It and Pull It Out

With this setup, a spring-loaded clip usually holds the bulb securely in place. Hold the clip firmly, then pull it toward you. This clip will loosen in some newer models, allowing you to fiddle with the plug. However, in many older cars, the clips are made to be removed entirely. If your vehicle can handle the design, you should find a good temporary location for the clip.

6. Remove the Old Bulb

The connector is designed to plug in to replace your old light bulb. Unplug it if this is the first time you have done so. Next, hold the original bulb by the plastic base and slowly try to pull it straight out. You may twist the base a bit if you want to remove it.

7. Hold the Bulb with a Paper Towel or Disposable Gloves

You have thus removed the old bulb. Put on disposable rubber gloves or a fresh piece of paper before installing the new one. It is why: The operating temperature of modern bulbs is relatively high. Our human hands continually release natural oils. They will begin to cook if they are wiped onto the glass of your inactive bulb after the light is turned on. Because of the heat stress brought on by the chemical reaction, the bulb can prematurely short out. Stop allowing this to happen to you. Hold the bulb firmly in your hands using gloves or a paper towel. Don't worry if you inadvertently touch the bulb; rinse it off with rubbing alcohol.

8. Carefully Insert the Replacement Bulb

Hold the new bulb by the base and slot it into the socket. Next, you'll want to plug it into the connector. Once you've done this, reverse step five. If you have a plastic catch mechanism, ensure the lever is back in its original position. If you use a metal clip setup, put the clip back where you picked it up. If you have a screw cap apparatus, screw the cap back on and check that the connector is plugged in.

9. Light up Your Journey

You should test the replacement bulb by revving the engine and turning the headlights on. If it doesn't seem to be working, turn off the vehicle and make sure the connector is firmly seated.

What is the h11 Headlight Price?

H11 bulbs are similar in price. H11 bulbs made with premium aviation-grade aluminum are more expensive than H11 bulbs with a performance from factory-made headlights. H11 LED Headlight bulbs price around $20 to $25.